1U 8kW Telecom Rectifier Power with SNMP Management and Compatible with both 3000W and 4000W Modules
1. Introduction of ESTEL 1U 8kW Compact Rectifier Power System
This product is specially designed for critical telecom communication application which has limited space for telecom power sytem. In its 1U height body, two rectifier slots and 3 way DC output breakers are designed. It also is configured with very rich communication interfaces. By using SNMP communication, the user can have easy remote monitoring and control of all his communication equipment.
This 1U rectifier power is an ideal solution for fiber and microwave transmission, access device,
switch.
It provides maximum current capacity of 150A. By designed with high quality compact breakers for AC input, DC load, and battery, it provides convenient cable connection and maintenance on the front panel.
2. Key Features of ESTEL 1U 8kW Compact Rectifier Power System
- Standard 19-inch width which has the advantage of wide use
- 1U height compact design, space and installation cost can be saved
- The AC input ,load and battery wiring are at the front end, signal wiring are at the rear end.
- Perfect battery management, prolongs the life of the battery well provide various communication ports, RS485, internet port, dry contacts, etc., which enables flexible networking and remote monitoring
- Rectifier and controller are hot pluggable, easy and quick on-line maintenance
- Wide input voltage range(85-290Vac) the power grid is adaptable
- The rectifier slot is compatible with both the 3KW rectifier module and the 4KW rectifier module.
3. Application Areas of ESTEL 1U 8kW Compact Rectifier Power System
- Wireless base station
- Transmission network
- Communication network of enterprises
4. Technical Indexes of ESTEL 1U 8kW Compact Rectifier Power System
| Parameter |
Description |
| AC Input |
Dimension |
482.6(W)*350(D)*44(1U/H) |
| Weight |
≤7kg (without rectifiers) |
|
Cooling mode
|
Natural cooling
|
| Installation mode |
Installed on 19-inch rack or inside the cabinet |
|
Cabling mode
|
Top inlet and top outlet
|
|
Maintenance mode
|
Front maintenance, support module grade change
|
|
Protection level
|
IP20
|
|
AC
Distribution
|
Input mode
|
220VAC single phase
|
|
Input capacity
|
1×63A/1P
|
|
Input frequency
|
45~66Hz, rated value: 50Hz/60Hz
|
|
DC
Distribution
|
Output voltage
|
-43~-58VDC, rated value: -53.5VDC
|
|
Maximum capacity
|
8kW(4KW*2)
|
|
Battery breakers
|
1×125A
|
|
Load breakers
|
BLVD:1×25A+1×32A
|
|
DC SPD
|
10kA/20KA, 8/20μs
|
| Power Capacity |
Rectifier slot configuration |
2 slots of 4000W modules, and compatible for 3000W modules. |
| Maximum power |
8kW |
| Configurable power |
3kW, 4kW, 6kW, 8kW |
For detailed technical datasheet and price, please consult ESTEL’s sales representative.
Product Tags:
|
|
1U 8kW Telecom Rectifier Power with SNMP Management and Compatible with both 3000W and 4000W Modules Images
|
